Adhesive for upper dentures

1. Check size: For smaller dentures, trim the adhesive cushion to fit with scissors.

2. Moisten cushion: Dip the adhesive cushion into lukewarm water for approx. 10 seconds and allow to drain.

3. Apply cushion: Place either side of the cushion on the moistened denture. The
rearmost 2 mm of the denture must remain uncovered.

4. Press on cushion: Press the cushion onto the dentures starting in the centre and working outwards until the cushion is smooth all over.

Adhesive for lower dentures

1. Step: For small dentures, trim the adhesive cushion to fit. Moisten the cushion and apply as described for the upper denture.

2. Press on cushion: Press the cushion into the jaw recess of the dentures using the index finger (starting in the centre and working outwards until the cushion is smooth all over). Tip: Should the adhesion begin to diminish, please remove the dentures and sprinkle the cushion with Protefix® Adhesive Powder.

Application
Adhesive for dentures

Please note the following important advice
To be used only on healthy mucous membranes. For hygiene reasons, the Protefix® Adhesive Cushion must be changed at least once a day. Do not use after the expiry date. The use of adhesive cushions should only be temporary. Please check the adequate form of your dentures regularly.